+90 312 394 40 22 pbx

Special Purpose Heaters

COLD ROOM CONCREATE HEATİNG CABLES

SPECIAL MANUFACTURED FLEXIBLE HEATERS

SLL (series LongLine Cable)

Chromalox SLL Series Long Line cable provides reliable temperature tracking for the process.

They can be used for temperature protection and frost protection in pipes, valves, tanks and similar applications. It is produced in accordance with 16,14, 12 or 10 AWG size standards with metal braid for industrial cable classifications. Serias long line cables ensure the continuity of operation even in the most difficult industrial environments. Allows for maximum exposure temperatures up to 450 ° F (232 ° C).

Skin Effect

Skin Effect Heating is especially used to provide indirect heat from a single source of electricity to very long pipelines. It can be used in Petroleum & Gas, Refineries, chemical or any similar industrial facility. The Skin Effect system is easy to use. The skin effect effect consists of the heating tube, cable, junction boxes, transformer and control panel.

 

COLD ROOM HEATER CABLES

Electric heating cables in cold rooms are used for two purposes.

To prevent the cold room floor concrete from freezing and damaging the water in the concrete and / or soil floor under the floor thermal insulation layer.

For this application, the heating load should be in the following range, with Ti value in C operating temperature (eg -18 C).

 

(5 – Ti) x 0,68 <……… <(5 – Ti) x 0,72 W / m²

The unit power of the heater cable should be in the range of 7w / m, 10w / m 17w / m and 30w / m and the distance between the heater cable rows should not exceed 50 cm. If the cable unit power and heating load conditions cannot be provided together, priority should be given to meeting the heating load requirement. However, the heater cable unit power should not exceed 35 W / m.

On both sides of the cold room entrance door, when the door is opened, to prevent floor icing caused by the temperature difference between the room and the entrance corridor. However, there is no need for heating cable application at cold room door thresholds opening to rooms with -5 ºC and lower operating temperature.

 

SPECIAL MANUFACTURED FLEXIBLE HEATERS

Special heaters are flexible heaters that are specially manufactured in a wide variety, size and design according to the needs.

Flexible / Molded Products can be used in a wide variety of applications for many applications in industrial sites.

 

In Medical Materials

Semiconductor

Power Systems / Motors

Contact

Catering

Lamination / Forming

Chromatography

Printing / Copying

Automat

Transport and Aviation

Production

Military

Barrel / Tank Heating